Florida Division of Historical Resources, Bureau of Archaeological Research 19990500 20010000 SHAPE http://dhr.dos.state.fl.us/index.html This data set contains historic structure locations and basic attributes as recorded at the Florida Master Site File. The dataset provides location and attribute information about Non-sensitive historical structures for use in resource management, law enforcement, and research purposes. The Bureau of Archaeological Research cares for state-owned archaeological sites and artifacts, and helps to identify, preserve and interpret the tangible remains of Florida's earlier cultures. 19990000 19990000 Ground Condition Complete Irregular -87.429040 -79.872251 30.983191 24.492815 NONE Florida History Historical Buildings Archaeology NONE Florida Historical Building Locations United States NONE 1990's NONE THE DATA INCLUDED IN THIS APPLICATION ARE BASED ON INTERPRETATION OF AVAILABLE INFORMATION AND SHOULD NOT BE CONSTRUED AS LEGALLY BINDING. Scale is an important factor in data usage. Certain scale data sets are not suitable for some projects, analysis, or modeling purposes. Please be sure you are using the best available data. 1:24000 scale data sets are recommended for projects that are at the county level. 1:24000 data should NOT be used for high accuracy base mapping such as property parcel boundaries. 1:100000 scale data sets are recommended for projects that are at the multi-county or regional level. 1:250000 scale data sets are recommended for projects that are at the regional or state level or larger. The locations of archaeological sites, historic structures, unmarked human burials, cemeteries, and other cultural features contained in this (and other) Florida Master Site File data layers are for resource management, law enforcement, and research purposes only. For more information, visit: http://dhr.dos.state.fl.us/index.html Florida Division of Historical Resources, Bureau of Archaeological Research 19990500 Map Relied on the integrity of the attribute information within the original data layer. Certain node/geometry and topology (GT)-polygon/chain relationships are collected or generated to satisfy topological requirements. Some of these requirements include: chains must begin and end at nodes, chains must connect to each other at nodes, chains do not extend through nodes, left and right GT-polygons are defined for each chain element and are consistent throughout the transfer, and the chains representing the limits of the file (neatline) are free of gaps. The neatline is generated by connecting the four corners of the digital file, as established during initialization of the digital file. All data outside the enclosed region are ignored and all data crossing these geographically straight lines are clipped at the neatline. (Exception: During the QA/QC process all data is examined and if errors are found and corrections are possible, then data is corrected accordingly. This process is documented in the Process_Step.) Data within a specified tolerance of the neatline are snapped to the neatline. Neatline straightening aligns the digitized edges of the digital data with the generated neatline, that is, with the longitude/latitude lines in geographic coordinates. All internal polygons are tested for closure. Certain attributes and/or entities, e.g. closure line, convey data quality information. When information to be encoded in the subfield is known to be not applicable (undefined, not relevant), then the subfield is valued by a string of "9s"; and when the information to be encoded is relevant but unknown (or missing), then the subfield is valued by a string of "9s." Certain node/geometry and topology (GT)-polygon/chain relationships are collected or generated to satisfy topological requirements. Some of these requirements include: chains must begin and end at nodes, chains must connect to each other at nodes, chains do not extend through nodes, left and right GT-polygons are defined for each chain element and are consistent throughout the transfer, and the chains representing the limits of the file (neatline) are free of gaps. The neatline is generated by connecting the four corners of the digital file, as established during initialization of the digital file. All data outside the enclosed region are ignored and all data crossing these geographically straight lines are clipped at the neatline. (Exception: During the QA/QC process all data is examined and if errors are found and corrections are possible, then data is corrected accordingly. This process is documented in the Process_Step.) Data within a specified tolerance of the neatline are snapped to the neatline. Neatline straightening aligns the digitized edges of the digital data with the generated neatline, that is, with the longitude/latitude lines in geographic coordinates. All internal polygons are tested for closure. Certain attributes and/or entities, e.g. closure line, convey data quality information. When information to be encoded in the subfield is known to be not applicable (undefined, not relevant), then the subfield is valued by a string of "9s"; and when the information to be encoded is relevant but unknown (or missing), then the subfield is valued by a string of "9s." This dataset contains archeological sites that are released for general public use and does not include all known sites. Contact the Florida Division of Historical Resources for further information concerning specific sensitive archeoloigcal sites. Florida Division of Historical Resources, Bureau of Archaeological Research 19990500 Map 100000 Map 19990000 19990000 Ground Condition FDHR (BAR) Vector data representing historic structure locations. The process step describes, in general, the process used in the production of data sets. The originating agencies created the original spatial coverage. GeoPlan, during the QA/QC process included the following aspects: (1) Projected data to FGDL Albers (2) Set Tolerances to FGDL Standards (3) Upcased Items (4) Added Descript Item based on STRUC_USE1 (5) Updated problems with the Registration Marks (Tics) 20000000 Albers Conical Equal Area 24.000000 31.500000 -84.000000 24.000000 400000.00000 0.00000 Coordinate Pair 0.002048 0.002048 METERS HPGN GRS1980 6378137.000000 298.257222 ARCHIS.DBF Database File None SITEID This is the state site number Florida Division of Historical Resources Record Number Unknown FORMNO Identifying code used to locate and track each site's original form and later update form(s) in the Florida Master Site File database Same Unknown SITENAME The site name as recorded at the Florida Master Site File Same Unknown ADDRESS The street address of the site, including the number, compass direction if relevant, and street name Same Unknown SURVEY_NO The serial number assigned by the Site File to the report or manuscript produced by the survey or project which identified or reexamined the cultural resource. Not all structures have an associated report or manuscript. Same Unknown ARCHITECT The name of the architect, designer, builder, landscape architect, or artist responsible for the actual DESIGN of the building, structure, or object being documented Same Unknown YEAR_BUILT The year of actual construction, as documented or estimated Same Unknown STRUC_SYS1 Major structural system(s) employed in the structure. Values in this field (as well as STRUC_SYS2 and STRUC_SYS3) are limited to a discrete list of possibilities used in the Site File Smartform program. A list of these values can be found in the field descriptions included in the Standing Structures Smartform, available at http://dhr.dos.state.fl.us/msf/smartform.html Same Unknown STRUC_SYS2 Major structural system(s) employed in the structure Same Unknown STRUC_SYS3 Major structural system(s) employed in the structure Same Unknown EXTERIOR_1 Major exterior fabric(s) used on the structure. Values in this field (as well as EXTERIOR_2, EXTERIOR_3, and EXTERIOR_4) are limited to a discrete list of possibilities used in the Site File Smartform program. A list of these values can be found in the field descriptions included in the Standing Structure Smartform, available at http://dhr.dos.state.fl.us/msf/smartform.html Same Unknown EXTERIOR_2 Major exterior fabric(s) used on the structure Same Unknown EXTERIOR_3 Major exterior fabric(s) used on the structure Same Unknown EXTERIOR_4 Major exterior fabric(s) used on the structure Same Unknown STRUC_USE1 Present use of the structure. Values in this field (as well as STRUC_USE2 and STRUC_USE3) are limited to a discrete list of possibilities used in the Site File Smartform program. A list of these values can be found in the field descriptions included in the Standing Structures Smartform, available at http://dhr.dos.state.fl.us/msf/smartform.html Same Unknown STRUC_USE2 Intermediate use of the structure Same Unknown STRUC_USE3 Original use of the structure Same Unknown LOCAL_SIG Surveyor's evaluation of a cultural resource's eligibility for listing on a local government's register of important sites Same Unknown SURV_EVAL Surveyor's evaluation of the cultural resource's eligibility for the National Register when the resource is considered as an independent entity -- not as a component or "contributing property" to a potential district Same Unknown SURV_DIST Surveyor's evaluation of cultural resource's eligibility for the National Register as part of a district or thematic group Same Unknown SHPO_EVAL Evaluation of Florida's State Historic Preservation Officer (SHPO) concerning the eligibility of the site for listing on the National Register of Historic Places Same Unknown D_NRLISTED Date that the site was officially listed in the National Register of Historic Places. The field is blank if the site is not listed on the National Register Same Unknown AV_STATUS Indicates whether the structure was address Matched(M) or on-screen Digitized(D) Same Unknown DESCRIPT Based on STRUC_USE1 Same Unknown Operator FLORIDA GEOGRAPHIC DATA LIBRARY Physical

431 Architecture Building PO Box 115706

Gainesville Florida 32611-5706 (352) 3920997, Operator http://www.fgdl.org/fgdldocs/document/techsupp.htm 24 Hours / Day Please visit the web site, http://www.fgdl.org, for all questions or concerns. Florida Geographic Data Library is a product of the University of Florida GeoPlan Center with support from the Florida Department of Transportation and the Florida Department of Environmental Protection. THE FGDL DATA AS PROVIDED BY CONTRIBUTING ORGANIZATIONS AND ANY PROGRAMMING SOFTWARE CREATED BY THE UNIVERSITY OF FLORIDA GEOPLAN CENTER (COLLECTIVELY THE "MATERIALS") ARE COPYRIGHTED BY THE UNIVERSITY OF FLORIDA GEOPLAN CENTER FOR THE FGDL CONTRIBUTING AGENCIES AND ORGANIZATIONS (THE "DATA PROVIDERS"). DO NOT REPRODUCE, REDISTRIBUTE OR RESELL THE MATERIALS, OR PROVIDE THE MATERIALS FOR FREE TO CUSTOMERS OR CLIENTS, OR PLACE THE MATERIALS FOR DOWNLOAD ON A WEBSITE. ADDITIONALLY, WHEN USING FGDL DATA OR SOFTWARE IN PROJECTS, MAPS, ETC.; YOU AGREE TO ACKNOWLEDGE THE FGDL AS A DATA SOURCE. THE MATERIALS ARE PROVIDED "AS IS". THE UNIVERSITY OF FLORIDA GEOPLAN CENTER MAKES NO REPRESENTATIONS OR WARRANTIES ABOUT THE QUALITY OR SUITABILITY OF THE MATERIALS, EITHER EXPRESSLY OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. THE UNIVERSITY OF FLORIDA GEOPLAN CENTER MAKES NO WARRANTIES, GUARANTIES OR REPRESENTATIONS AS TO THE TRUTH, ACCURACY OR COMPLETENESS OF THE DATA PROVIDED BY THE FGDL CONTRIBUTING ORGANIZATIONS. THE UNIVERSITY OF FLORIDA GEOPLAN CENTER SHALL NOT BE LIABLE FOR ANY DAMAGES SUFFERED AS A RESULT OF USING, MODIFYING, CONTRIBUTING OR DISTRIBUTING THE MATERIALS. 19990500 Operator Physical

R. A. Gray Building, 500 South Bronough St.

Tallahassee Florida 32399-0250 (850) 487-2299 FGDC Content Standards for Digital Geospatial Metadata FGDC-STD-001-1998