Florida Department of Environmental Protection, Division of Waste Management, Solid Waste Unit 19970900 20010000 SHAPE http://www.dep.state.fl.us This dataset contains locations of various types of solid waste facilities for the state of Florida. The Bureau of Solid and Hazardous Waste is responsible for the planning, management and regulation of solid and hazardous waste. Operations range from recycling, waste reduction, household hazardous waste, and pollution prevention to permitting of solid waste management facilities and hazardous waste treatment, storage and disposal facilities. The Bureau also establishes regulatory and management criteria for special wastes such as waste tires, ash, used oil, batteries and mercury devices. 19970900 Ground Condition Complete Irregular -87.429040 -79.872251 30.983191 24.492815 NONE Florida Department of Environmental Protection Solid waste facilities Planning NONE Florida Solid waste facility locations NONE 1990's NONE THE DATA INCLUDED IN THIS APPLICATION ARE BASED ON INTERPRETATION OF AVAILABLE INFORMATION AND SHOULD NOT BE CONSTRUED AS LEGALLY BINDING. Scale is an important factor in data usage. Certain scale data sets are not suitable for some projects, analysis, or modeling purposes. Please be sure you are using the best available data. 1:24000 scale data sets are recommended for projects that are at the county level. 1:24000 data should NOT be used for high accuracy base mapping such as property parcel boundaries. 1:100000 scale data sets are recommended for projects that are at the multi-county or regional level. 1:250000 scale data sets are recommended for projects that are at the regional or state level or larger. Vector datasets with no defined scale or accuracy should be considered suspect. Make sure you are familiar with your data before using it for projects or analyses. Every effort has been made to supply the user with data documentation. For additional information, see the References section and the Data Source Contact section of this documentation. For more information regarding scale and accuracy, see our web pages at: http://www.geoplan.ufl.edu/education.html For more information, visit: http://www.dep.state.fl.us Florida Department of Environmental Protection 19970900 Map Relied on the integrity of the attribute information within the original data layer. Certain node/geometry and topology (GT)-polygon/chain relationships are collected or generated to satisfy topological requirements. Some of these requirements include: chains must begin and end at nodes, chains must connect to each other at nodes, chains do not extend through nodes, left and right GT-polygons are defined for each chain element and are consistent throughout the transfer, and the chains representing the limits of the file (neatline) are free of gaps. The neatline is generated by connecting the four corners of the digital file, as established during initialization of the digital file. All data outside the enclosed region are ignored and all data crossing these geographically straight lines are clipped at the neatline. (Exception: During the QA/QC process all data is examined and if errors are found and corrections are possible, then data is corrected accordingly. This process is documented in the Process_Step.) Data within a specified tolerance of the neatline are snapped to the neatline. Neatline straightening aligns the digitized edges of the digital data with the generated neatline, that is, with the longitude/latitude lines in geographic coordinates. All internal polygons are tested for closure. Certain attributes and/or entities, e.g. closure line, convey data quality information. When information to be encoded in the subfield is known to be not applicable (undefined, not relevant), then the subfield is valued by a string of "9s"; and when the information to be encoded is relevant but unknown (or missing), then the subfield is valued by a string of "9s." Certain node/geometry and topology (GT)-polygon/chain relationships are collected or generated to satisfy topological requirements. Some of these requirements include: chains must begin and end at nodes, chains must connect to each other at nodes, chains do not extend through nodes, left and right GT-polygons are defined for each chain element and are consistent throughout the transfer, and the chains representing the limits of the file (neatline) are free of gaps. The neatline is generated by connecting the four corners of the digital file, as established during initialization of the digital file. All data outside the enclosed region are ignored and all data crossing these geographically straight lines are clipped at the neatline. (Exception: During the QA/QC process all data is examined and if errors are found and corrections are possible, then data is corrected accordingly. This process is documented in the Process_Step.) Data within a specified tolerance of the neatline are snapped to the neatline. Neatline straightening aligns the digitized edges of the digital data with the generated neatline, that is, with the longitude/latitude lines in geographic coordinates. All internal polygons are tested for closure. Certain attributes and/or entities, e.g. closure line, convey data quality information. When information to be encoded in the subfield is known to be not applicable (undefined, not relevant), then the subfield is valued by a string of "9s"; and when the information to be encoded is relevant but unknown (or missing), then the subfield is valued by a string of "9s." Florida Department of Environmental Protection, Division of Waste Management, Solid Waste Unit 19970900 Map N/A Map 19970900 Ground Condition FDEP, DWM , SWU Data representing solid waste facilities in the state of Florida. The process step describes, in general, the process used in the production of data sets. The originating agencies created the original spatial coverage. GeoPlan, during the QA/QC process included the following aspects: (1) Changed projection from datum HPGN to HPGN (2) Tolerances were changed to FGDL standards. (3) DESCRIPT item was added based on the CLASS code. (4) Notes: Many Points were wrongly located off the coast and in different counties. These points were correctd and reprojected to obtain new latitudes and longitudes which were added to items F_LAT_DMS and F_LONG_DMS respectively. 20000000 Albers Conical Equal Area 24.000000 31.500000 -84.000000 24.000000 400000.00000 0.00000 coordinate pair 0.001024 0.001024 METERS D_North_American_1983_HARN GRS1980 6378137.000000 298.257222 SLDWST.DBF Database File None SITE_NAME Name of Solid Waste Facility FDEP record Unknown GMS_ID Unique identification code which is defined as follows: DDCCTNNNNN where DD= District Code [10= Northwest(Pensacola) 30= Central(Orlando)31= Northeast(Jacksonville)40= Southwest(Tampa)50= Southeast(W. Palm Beach) 51= Southeast Branch 52= South(Ft. Myers)], CC= County Code(DEP county code number), T= Ownership Type(C= County owned/operated F= Federal M= Municipal P= Private S= State), NNNNN= Sequence No(manually assigned). Same Unknown CLASS Class Code for Solid Waste Facility Same 100 CLASS I LANDFILL Same 200 CLASS II LANDFILL Same 300 CLASS III LANDFILL Same 310 TRASH/YARD TRASH Same 320 YARD TRASH COMPOSTING (17-701) Same 400 SLUDGE DISPOSAL FACILITY Same 500 OTHER DISPOSAL FACILITY Same 510 SPECIAL WASTE Same 511 TIRE DISPOSAL Same 520 OLD DUMP Same 530 LACK OF DATA Same 540 CONSTRUCTION/DEMOLITION DEBRIS Same 590 UNAUTHORIZED DUMP Same 591 C & D DEBRIS, UNAUTHORIZED Same 592 WASTE TIRE SITE, UNAUTHORIZED Same 600 TREATMENT FACILITY Same 610 INCINERATION Same 611 BIOHAZARDOUS WASTE TREATMENT Same 620 PYROLYSIS Same 630 OTHER TREATMENT Same 631 BIOHAZARDOUS WASTE TREATMENT Same 700 VOLUME REDUCTION/TRANSFER STATION Same 710 WASTE TIRE PROCESSING FACILITY Same 720 SHREDDER/PULVERIZER Same 721 AUTO/WHITE GOODS SHREDDER Same 722 MOBILE SHREDDER Same 730 SLUDGE CONCENTRATION Same 740 COMPOSTING PLANT Same 741 SLUDGE COMPOSTING Same 742 YARD TRASH ONLY COMPOSTING (17-709) Same 743 MANURE COMPOSTING Same 748 OTHER COMPOSTING (17-701) Same 749 OTHER COMPOSTING (17-709) Same 750 TRANSFER STATION Same 751 WASTE TIRE COLLECTION CENTER Same 752 USED OIL COLLECTION CENTER Same 753 BIOHAZARDOUS WASTE STORAGE Same 800 RESOURCE RECOVERY FACILITY Same 810 MATERIAL RECOVERY Same 811 USED OIL RECYCLING Same 812 CONTAINER RECYCLING Same 820 ENERGY RECOVERY Same 821 BIOMASS GAS/LIQUID PRODUCTION Same 900 OTHER VOLUME REDUCTION/RESOURCE RECOVERY FACILITY Same Unknown YNAME County where solid waste facility is located Same Unknown PERMIT Permit number issued by FDEP Same Unknown EXPIRE Date of expiration of permit Same Unknown STATUS Status of solid waste facility is as follows: ACTIVE, INACTIVE, CLOSED Same Unknown AS_OF Date since the facility was in the specified status Same Unknown SITE_LOC Site location of solid waste facility Same Unknown CITY City where solid waste facility is located Same Unknown STATE State where solid waste facility is located Same Unknown OPERATOR Operator name of solid waste facility Same Unknown ADDRESS Address of operator Same Unknown OP_CITY City where the operator is located Same Unknown OP_STATE State where the operator is located Same Unknown ZIP Zip code of operator address Same Unknown PHONE_NO Phone number of operator Same Unknown POPULATION Population Served (often used as permitting criteria) Same Unknown QUANTITY Solid Volume Quantity Same Unknown QUANT_UNIT Abbreviation for name of regional planning council. Same CYD Cubic Yards Same GAL Gallons Same TPD Tons Per Day Same TON Tons Same Unknown DESIGN_CAP Designed Capacity Same Unknown CAP_UNIT Abbreviation for name of regional planning council. Same CYD Cubic Yards Same GPD Gallons Per Day Same MPD Million Gallons Per Day Same TGD Thousand Gallons Per Day Same TON Tons Same TPD Tons Per Day Same Unknown MONIT_WELL Number of monitoring wells, if the facility contains any Same Unknown DISP_ACRE Acreage of the actual disposal area footprint Same Unknown LINER_TYPE Type of liner used in facility Same A Asphalt Same B Bentonite Same C Natural Clay Same E Emplaced Clay Same G Geotextile Same H Hybrid Same N None Same O Other Same P Plastic Same U Unknown Same Unknown SITE_LIFE Expected or permitted life of the facility in years Same Unknown LAT_DD Latitude Degrees Same Unknown LAT_MM Latitude Minutes Same Unknown LAT_SS Latitude Seconds Same Unknown LONG_DD Longitude Degrees Same Unknown LONG_MM Longitude Minutes Same Unknown LONG_SS Longitude Seconds Same Unknown F_LAT_DMS Latitude in Degrees, Minute and Seconds assigned after FGDL quality control. Most points are the same as items LAT_DD, LAT_MM and LAT_SS. Same Unknown F_LONG_DMS Longitude in Degrees, Minute and Seconds assigned after FGDL quality control. Most points are the same as items LONG_DD, LONG_MM and LONG_SS. Same Unknown DESCRIPT Based on item CLASS and describes the class codes Same Unknown Operator FLORIDA GEOGRAPHIC DATA LIBRARY Physical

431 Architecture Building PO Box 115706

Gainesville Florida 32611-5706 (352) 3920997, Operator http://www.fgdl.org/fgdldocs/document/techsupp.htm 24 Hours / Day Please visit the web site, http://www.fgdl.org, for all questions or concerns. Florida Geographic Data Library is a product of the University of Florida GeoPlan Center with support from the Florida Department of Transportation and the Florida Department of Environmental Protection. THE FGDL DATA AS PROVIDED BY CONTRIBUTING ORGANIZATIONS AND ANY PROGRAMMING SOFTWARE CREATED BY THE UNIVERSITY OF FLORIDA GEOPLAN CENTER (COLLECTIVELY THE "MATERIALS") ARE COPYRIGHTED BY THE UNIVERSITY OF FLORIDA GEOPLAN CENTER FOR THE FGDL CONTRIBUTING AGENCIES AND ORGANIZATIONS (THE "DATA PROVIDERS"). DO NOT REPRODUCE, REDISTRIBUTE OR RESELL THE MATERIALS, OR PROVIDE THE MATERIALS FOR FREE TO CUSTOMERS OR CLIENTS, OR PLACE THE MATERIALS FOR DOWNLOAD ON A WEBSITE. ADDITIONALLY, WHEN USING FGDL DATA OR SOFTWARE IN PROJECTS, MAPS, ETC.; YOU AGREE TO ACKNOWLEDGE THE FGDL AS A DATA SOURCE. THE MATERIALS ARE PROVIDED "AS IS". THE UNIVERSITY OF FLORIDA GEOPLAN CENTER MAKES NO REPRESENTATIONS OR WARRANTIES ABOUT THE QUALITY OR SUITABILITY OF THE MATERIALS, EITHER EXPRESSLY OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. THE UNIVERSITY OF FLORIDA GEOPLAN CENTER MAKES NO WARRANTIES, GUARANTIES OR REPRESENTATIONS AS TO THE TRUTH, ACCURACY OR COMPLETENESS OF THE DATA PROVIDED BY THE FGDL CONTRIBUTING ORGANIZATIONS. THE UNIVERSITY OF FLORIDA GEOPLAN CENTER SHALL NOT BE LIABLE FOR ANY DAMAGES SUFFERED AS A RESULT OF USING, MODIFYING, CONTRIBUTING OR DISTRIBUTING THE MATERIALS. 2001 Operator Physical

3900 Commonwealth

Tallahassee FL 32399 (850) 488-3701 FGDC Content Standards for Digital Geospatial Metadata FGDC-STD-001-1998